the characteristics of lead-acid batteries and discharging
- the characteristics of lead-acid batteries (for FM, GFM, SW series)
- sealing: prevent the leak acid by battery for Sony np-fm50 slot cover, pole double seal design , a reliable safety valve to prevent the external air and dust into the battery inside;
- maintenance-free: water regeneration ability, and sealing of high reaction efficiency, so the whole process of using the battery without overtime pay or adding acid maintenance;
- safe and reliable: No acid spill, reliable self-closing safety valve, explosion-proof equipment, equipment that enables the use of race to the Sony np-fm55h battery in the whole process more secure and reliable;
- long-life design: a computer-designed fine corrosion-resistant lead-calcium-lead alloy grid, ABS corrosion-resistant materials, use and high reaction efficiency seal ensures long battery life;
- high performance:
- body weigh of lead-acid Sony np-fp50 batteriest is higher than the energy , resistance is small, output power is high;
- charge and discharge high-performance, self-discharge control of each month, less than 2% (20 ℃);
- recovery performance is good, in deep Discharge or charger failure, short-circuit to place 30 days after the charging method so that it can still be used to restore a balanced capacity;
- As the single battery internal resistance, capacity, float voltage uniformity is good, so the use of battery for Sony np-fp90 in float a state of equilibrium without charge.
- temperature adaptability: the akku can be -30 ℃ ~ 50 ℃ under the safe, secure use;
- easy to use and transport safety: Man charged the factory, no free electrolyte, the battery can be placed horizontally, and can be non-hazardous materials for water, land transport;
- economical: Burke battery for Sony np-fr1 high performance, long life, low maintenance costs to ensure that users get the most cost-effective products.
- The battery discharge
- the discharge termination voltage
The Sony np-fs11 battery should not be discharged below a predetermined termination voltage will cause excessive discharge, which would result in repeated over-discharge capacity of difficult to restore, in order to achieve the best efficiency and longest life, discharge should be between 0.05-3C;
- the discharge capacity:
- the discharge capacity and discharge current relationships: the series of batteries for Sony np-fs21 has the different capacity at different discharge rates , the greater the discharge rate, the battery of the the smaller capacity can be released.
- Temperature effect: the Sony np-ft1 battery capacity is subject to the influence of temperature, low temperature (below - 15 ℃ / 5 ℉) would reduce the effective capacity, high temperature (higher than 50 ℃ / 122 ℉) would lead to thermal runaway and damage to the battery.
{ Post a Comment }
{ Last Page } { Page 6 of 10 } { Next Page }
|
About Me
« September 2010 »
| Mon | Tue | Wed | Thu | Fri | Sat | Sun | | | 1 | 2 | 3 | 4 | 5 |
| 6 | 7 | 8 | 9 | 10 | 11 | 12 |
| 13 | 14 | 15 | 16 | 17 | 18 | 19 |
| 20 | 21 | 22 | 23 | 24 | 25 | 26 |
| 27 | 28 | 29 | 30 | |
Links
Canon BP-412 Canon BP-911 Dell xps m1730 battery Sony NP-FH100
Categories
camera news common sense tips
Recent Entries
The Fuel Cells (二) The Fuel Cells (一) The Fuel Cells (一) To extend the MP3 battery life IEC provides the identification method of rechargeable battery
Friends
|